1 of 2 ? 2014 te connectivity family of companies all rights reserved *trademark te connectivity, te connectivity (logo), and te (logo) are trademarks. other logos, product, and/or company names may be tra demarks of their respective owners. tooling assistance center 1 - 800 - 722 - 1111 product information 1 - 800 - 522 - 6752 this controlled document is subject to change. for latest revision and regional customer service, visit our website at www.te.com. instruction sheet 408 - 32128 14 mar 14 rev a collet tool part number collet part number 2280054 - 1 2103155 - 1 2280054 - 2 2103155 - 2 2280054 - 3 2103155 - 3 figure 1 1. introduction collet tool 2280054 - [ ] is designed to be used with collet part numbers found in figure 1. 2. procedures 1. insert the collet into the appropriate collet tool in the orientation shown in figure 2 with the collet fingers extending into the tool. figure 2 amp+ hva280 collet tool 2280054 - [ ] collet tool 2280054 - 1, - 2, - 3 co llet 2103155 - 1, - 2, - 3 original instructions
408 - 32128 rev a 2 of 2 2. apply pressure to collet until it is fully seated in the collet tool. full insertion is achieved when the orange collet flange is against the tool flange as shown in figure 3. the longer the collet is left in the tool, the more set the collet fing ers will retain. figure 3 3. remove the collet from the tool and apply to cable as required. see figure 4. figure 4 3. revision summary ? initial release of document
|
